Narrow bedroom bench are a good addition to any bedroom. Because they can be decorated in many different ways, you can personalize by building your own. Choose a good quality of plywood if it is to be colored or a smooth-grain wood for paint. Look through pictures of the bedroom benches to get a general idea of what they look and their function. Ideas for build narrow bedroom bench, place the lower shelf in the bedroom bench on a worktop. Measure from one end and mark the shelf at 12 and 24 inches. Place framing squares on the marks and draw lines across the width of the shelf.
Then for build narrow bedroom bench, place 2 by 2 blocks on the lines. Two must be placed on the ends and the other two on 12 and 24-inch lines. Trace a line on the side of the blocks without a line. Remove the blocks and drill three pilot holes 1/16-inch drilled with. Then apply glue to the top of the blocks and put the shelf on them, adjust the blocks with pilot holes. Secure them with the drywall screws. Clean up excess glue immediately with a damp cloth. Place the ends, front and back of the worktop. Then measure from the bottom edge and make a mark of 12 inches. Make this several places on the four pieces of plywood.
Measure from the bottom edge of the front and back and make marks of 2¼ inches. Place framing squares on these trademarks and draw a light line that connects all the brands. This is where the lower shelf meets front and back. Then place the bottom shelf between the ends and secure them with the plaster wall shelves. Apply glue on the edges of the ends, and the bottom shelf, and fasten the front to the bench with diver. The last for build narrow bedroom bench, install the piano hinge on the back edge of the top. Put the top of the bedroom bench and install the piano hinge on the back of the bench.